Theme Setup

Reading time ~10 minutes

General notes and suggestions for customizing HPSTR.

Basic Setup for a new Jekyll site

  1. Install Bundler gem install bundler and then install Jekyll and all dependencies bundle install.
  2. Fork the HPSTR Jekyll Theme repo.
  3. Clone the repo you just forked and rename it.
  4. Edit _config.yml to personalize your site.
  5. Check out the sample posts in _posts to see examples for pulling in large feature images, assigning categories and tags, and other YAML data.
  6. Read the documentation below for further customization pointers and documentation.
Download the Theme

Pro-tip: Delete the gh-pages branch after cloning and start fresh by branching off master. There is a bunch of garbage in gh-pages used for the theme’s demo site that I’m guessing you don’t want on your site.


Setup for an Existing Jekyll site

  1. Clone the following folders: _includes, _layouts, ‘_sass’, assets, and images.
  2. Clone the following folders/files and personalize content as need: about/, posts/, tags/, feed.xml. and ‘index.html’.
  3. Set the following variables in your config.yml file:
title:            Site Title
description:      Describe your website here.
disqus_shortname: shortname
# Your site's domain goes here (eg: //mmistakes.github.io, http://mademistakes.com, etc)
# When testing locally leave blank or use http://localhost:4000
url:              //mmistakes.github.io

# Owner/author information
owner:
  name:           Your Name
  avatar:         avatar.jpg
  bio:            "Your bio goes here. It shouldn't be super long but a good two sentences or two should suffice."
  email:          you@email.com
  # Social networking links used in footer. Update and remove as you like.
  twitter:        
  facebook:       
  github:         
  stackexchange:  
  linkedin:       
  instagram:      
  flickr:         
  tumblr:         
  # google plus id, include the '+', eg +mmistakes
  google_plus:    +yourid

# Analytics and webmaster tools stuff goes here
google_analytics:   
google_verify:      
# https://ssl.bing.com/webmaster/configure/verify/ownership Option 2 content= goes here
bing_verify:         

# http://en.wikipedia.org/wiki/List_of_tz_database_time_zones
timezone:    America/New_York
future:      true
pygments:    true
markdown:    kramdown

# Amount of posts to show on home page
paginate: 5

Running Jekyll

If jekyll build and jekyll serve throw errors you may have to run Jekyll with bundled exec instead.

In some cases, running executables without bundle exec may work, if the executable happens to be installed in your system and does not pull in any gems that conflict with your bundle.

However, this is unreliable and is the source of considerable pain. Even if it looks like it works, it may not work in the future or on another machine.

bundle exec jekyll build

bundle exec jekyll serve

Folder Structure

hpstr-jekyll-theme/
├── _includes
|    ├── browser-upgrade.html       # prompt to upgrade browser on < IE8
|    ├── footer.html                # site footer
|    ├── head.html                  # site head
|    ├── navigation.html            # site navigation
|    └── scripts.html               # jQuery, plugins, GA, etc
├── _layouts
|    ├── page.html                  # page layout
|    ├── page.html                  # post-index layout used on home page
|    └── post.html                  # post layout
├── _posts
├── _sass                           # Sass partials
├── assets
|    ├── css                        # compiled stylesheets
|    ├── js
|    |   ├── _main.js               # plugin options
|    |   ├── scripts.min.js         # concatenated and minifed site scripts
|    |   ├── plugins                # plugin scripts
|    └── └── vendor                 # jQuery and Modernizr scripts
├── images                          # images for posts and pages
├── _config.yml                     # Jekyll options
├── about/                          # about page
├── posts/                          # all posts
├── tags/                           # all posts grouped by tag
└── index.html                      # home page with pagination

Customization

Most of the variables found here are used in the .html files found in _includes if you need to add or remove anything. A good place to start would be to add the title, description, and url for your site. Links are absolute and prefixed with {{ site.url }} in the various _includes and _layouts, so remember to properly set url1 to http://localhost:4000 when developing locally.

Disqus Comments

Create a Disqus account and change disqus_shortname in _config.yml to the Disqus shortname you just setup. By default comments appear on all post and pages if you assigned a shortname. To disable commenting on a post or page, add the following to its YAML Front Matter:

comments: false

To enable Facebook, Twitter, and Google+ share links on a post or page, add the following to its front matter:

share: false

Owner/Author Information

Change your name, and avatar photo (200x200 pixels or larger), email, and social networking URLs. If you want to link to an external image on Gravatar or something similar you’ll need to edit the path in head.html since it assumes it is located in /images.

Google Analytics and Webmaster Tools

Your Google Analytics ID goes here along with meta tags for Google Webmaster Tools and Bing Webmaster Tools site verification.

To add additional links in the drop down menu edit _data/navigation.yml. Use the following format to set the URL and title for as many links as you’d like. External links will open in a new window.

- title: Portfolio
  url: /portfolio/

- title: Made Mistakes
  url: http://mademistakes.com  

Adding New Content with Octopress

While completely optional, I’ve included Octopress and some starter templates to automate the creation of new posts and pages. To take advantage of it start by installing the Octopress gem if it isn’t already.

$ gem install octopress --pre

New Post

Default command

$ octopress new post "Post Title"

Default works great if you want all your posts in one directory, but if you’re like me and want to group them into subfolders like /posts, /portfolio, etc. Then this is the command for you. By specifying the DIR it will create a new post in that folder and populate the categories: YAML with the same value.

$ octopress new post "New Post Title" --dir posts

New Page

To create a new page use the following command.

$ octopress new page new-page/

Jekyll _includes

For the most part you can leave these as is since the author/owner details are pulled from _config.yml. That said you’ll probably want to customize the copyright stuff in footer.html to your liking.

Reading Time

On by default. To turn off remove reading_time from _config.yml. Default words per minute is set at 200 and can changed by updating words_per_minute in _config.yml`.

Feature Images

A good rule of thumb is to keep feature images nice and wide so you don’t push the body text too far down. An image cropped around around 1024 x 256 pixels will keep file size down with an acceptable resolution for most devices. If you want to serve these images responsively I’d suggest looking at the Jekyll Picture Tag2 plugin.

The two layouts make the assumption that the feature images live in the images folder. To add a feature image to a post or page just include the filename in the front matter like so.

image:
  feature: feature-image-filename.jpg
  thumb: thumbnail-image.jpg #keep it square 200x200 px is good

If you want to apply attribution to a feature image use the following YAML front matter on posts or pages. Image credits appear directly below the feature image with a link back to the original source.

image:
  feature: feature-image-filename.jpg
  credit: Michael Rose #name of the person or site you want to credit
  creditlink: http://mademistakes.com #url to their site or licensing

Post/Page Thumbnails for OG and Twitter Cards

Post and page thumbnails work the same way. These are used by Open Graph and Twitter Cards meta tags found in head.html. If you don’t assign a thumbnail the image you assigned to site.owner.avatar in _config.yml will be used.

Here’s an example of what a tweet to your site could look like if you activate Twitter Cards and include all the metas in your post’s YAML.

Twitter Card summary large image screenshot

Videos

Video embeds are responsive and scale with the width of the main content block with the help of FitVids.

Not sure if this only effects Kramdown or if it’s an issue with Markdown in general. But adding YouTube video embeds causes errors when building your Jekyll site. To fix add a space between the <iframe> tags and remove allowfullscreen. Example below:

<iframe width="560" height="315" src="http://www.youtube.com/embed/PWf4WUoMXwg" frameborder="0"> </iframe>

Twitter Cards

Twitter cards make it possible to attach images and post summaries to Tweets that link to your content. Summary Card meta tags have been added to head.html to support this, you just need to validate and apply your domain to turn it on.

Link Post Type

Link blog like a champ by adding link: http://url-you-want-linked to a post’s YAML front matter. Arrow glyph links to the post’s permalink and the the post-title links to the source URL. Here’s an example of a link post if you need a visual.


Further Customization

Jekyll 2.x added support for Sass files making it much easier to modify a theme’s fonts and colors. By editing values found in _sass/variables.scss you can fine tune the site’s colors and typography.

For example if you wanted a red background instead of white you’d change $bodycolor: #fff; to $bodycolor: $cc0033;.

To modify the site’s JavaScript files I setup a Grunt build script to lint/concatenate/minify all scripts into scripts.min.js. Install Node.js, then install Grunt, and then finally install the dependencies for the theme contained in package.json:

npm install

From the theme’s root, use grunt concatenate JavaScript files, and optimize .jpg, .png, and .svg files in the images/ folder. You can also use grunt dev in combination with jekyll build --watch to watch for updates JS files that Grunt will then automatically re-build as you write your code which will in turn auto-generate your Jekyll site when developing locally.


Questions?

Having a problem getting something to work or want to know why I setup something in a certain way? Ping me on Twitter @mmistakes or file a GitHub Issue. And if you make something cool with this theme feel free to let me know.


License

This theme is free and open source software, distributed under the MIT License. So feel free to to modify this theme to suit your needs.


  1. Used to generate absolute URLs in feed.xml, and for canonical URLs in head.html. Don’t include a trailing / in your base url ie: http://mademistakes.com. When developing locally I suggest using http://localhost:4000 or whatever localhost you’re using to properly load all theme stylesheets, scripts, and image assets. If you leave this variable blank all links will resolve correctly except those pointing to home.

  2. If you’re using GitHub Pages to host your site be aware that plugins are disabled. So you’ll need to build your site locally and then manually deploy if you want to use this sweet plugin.